and easy to apply using a brush or spray. Simply follow
the instructions on the back of the tin.
1. Prepare all surfaces well. Ensure they are clean, sound
and dry. Repair any cracks or dents with a suitable
filler. Sand pre-painted or glossy surfaces to provide
2. Apply StoneLux Primer to the surface using
a brush. Allow approx. 2 hours to dry thoroughly
3. Brush on a thin coat of Inglenook Fireside (do
not try to apply all in one coat), spreading as evenly
as possible. Allow approx 2 hours to dry before applying
another coat (2-3 thin coats).
4. Apply final coat as in step 3. Stipple the surface while
still wet using a stippling brush or a small paste brush
to give a uniformed mottled appearance. Continue stippling
periodically until your desired effect is achieved.